Shiv Enterprises

• All valves are cleaned and packaged for oxygen service per CGA G-4.1.
• Bubble tight at 95% of set pressure. 
• Easy to read color coded PSIG / bar labels.
• Tamper resistant
• Adapters provide standard pipe thread connections for venting gas to the outdoors.
• Repeatable performance.
• 100% factory tested.
• Rated for gas service only

Repair Kit for master shutoff valves. Pack consists of 10 child parts.
Lock Nut
Washer
Friction Washer
Thrust Bearing
Retalner
Backup Ring
Retalner Lower
O Ring
Washer
Seat Assemnbly
Application:
The HP9560 Series high pressure brass valves are used on cylinder filling panels, tube trailers, and other high pressure manifolds and piping systems. The HP9560 Series exhibits a very low operating torque under pressure for ease of manual operation.
Features:
5600 PSI (386 Bar) maximum working pressure
Non-rising stem design with O-Ring Seal for durable service.
Large brass handwheel for easy low torque operation under pressure.
All valves cleaned for use in oxygen per CGA G-4.1.
100% Factory Tested
Soft Seat Option:
The soft seat valves use a CTFE seat disc in the seat retainer to create a "bubble-tight" seal against a machined seat surface on the brass body. Valve Cv is 2.6. The soft seat option is especially useful for small molecule gases like hydrogen and helium, but can be used for a variety of non-corrosive industrial gases including oxygen, argon, nitrogen, carbon dioxide, nitrous oxide, and acetylene.
Metal Seat Option:
A copper seat disc is used in the seat retainer to create a seal against a Monel body seat, which is installed into the body and can be replaced. The metal seat option minimizes the possibility of seat decomposition or ignition in oxygen service under adiabatic compression. The metal seat option is recommended for oxygen, and can also be used for other non-corrosive industrial gases. The metal seat option is not to be used for acetylene due to the copper seat. Not to be applied in hydrogen or helium service or where a "bubble-tight" seal is essential. (Note: C in part number)

• Spring-loaded stem seal automatically adjusts for any gasket wear, eliminating the need to constantly retighten the packing nut.
• Non-rising stem and low profile allow the valve to fit into tight areas and still provide easy access.
• Unique pressure-sealed moisture barrier helps prevent freeze up at cryogenic temperatures.
• Conical swivel seal design helps prevent seat galling from over torquing. 
• Cleaned for liquid oxygen service per CGA G-4.1.
• Maximum working pressure is 609 PSIG. (42 Bar)
• 100% Factory Tested